EVISTR VOICE RECORDER
Page - 17 - of -25 -
active the recording, otherwise, the recording time is not counting, and it was pause recording.
While
level five
, is the mostly sensitive level, it means the mic is very sensitive, just a soft
speaking will be captured. It will be almost continuously recording, cannot see pause status.
NOTICE:
When voice activated recording is ON, during recording screen will show VOX
During recording, if no voice detected, the time will not counting, that means the recorder was
automatically paused recording, when voice detected again, it will resume recording
automatically
Select desired MIC sensitive level according to demanding
1.5 Record Monitor
ON: when ON, use earphones to hear what it is recording.
OFF: turn off this function.
1.6 Exit
Exit record setting, return to up level menu
2) System Setting
2.1 Sleeper timer
When select sleeper time,
it will force the device to be automatically switched off.
The options: OFF, 10minutes, 30minutes, 60minutes, 90minutes, 120minutes
2.2 Backlight timer
Backlight timer, it will control how long the screen will light up without any operation.
The options: 20seconds, 30seconds, Always on
Notice: we do not recommend to select at always on, because this will consume the battery
very fast
2.3 Brightness
Brightness: adjust the screen from dark to bright
The options: from 00 to 15
Notice: higher number means the screen will be brighter, and need to press M(menu) to
confirm the changes, otherwise the setting will not be effective.
2.4 Date and time
Set the system time of the recorder (set time, and set date)
UP/DOWN:
to adjust the hour, minute, year, month, day
VOL+/VOL-:
move to next
Notice:
