Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 81 / 321

4-3 PoE Power Delay
This page allows the user to setting the delay time of power providing after device rebooted.
Web Interface
To Display Power over Ethernet Status in the web interface:
Click PoE Management and PoE Power delay.
Enable the port to the power device.
Specify the power providing delay time when reboot.
Click Apply to apply the change.
Figure 4-3: The PoE Power Delay
Parameter description:

Port :
This is the logical port number for this row.

Delay Mode :
Turn on / off the power delay function.
Enabled : Enable POE Power Delay.
Disabled : Disable POE Power Delay.

Delay Time(0~300sec) :
When rebooting, the PoE port will start to provide power to the PD when it out of delay
time. Default: 0, range: 0-300 sec.
Buttons

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.