![Evidence Cross-8/HPoE-10G Скачать руководство пользователя страница 66](http://html1.mh-extra.com/html/evidence/cross-8-hpoe-10g/cross-8-hpoe-10g_user-manual_2445999066.webp)
Figure 3-5.4: The LACP Internal Status buttons
Auto-refresh :
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Refresh :
Click to refresh the page.
3-5.5 Neighbor Status
This page provides a status overview for the
neighbor status for all ports. Only ports that are part
of an LACP group are shown. For details on the shown parameters please refer to IEEE 801.AX-2014.
X
Web Interface
To display the LACP Neighbor Port status in the web interface:
Click Port Management, Link Aggregation
and Neighbor Status.
Checked “Auto-refresh”.
1.
Click “Ref
resh” to refresh the port detailed statistics.
Figure 3-5.5: The LACP Neighbor Port Status
Parameter description:
Aggr ID :
The aggregation group ID which the port is assigned to.
Port :
The switch port number.
State :
The current port state:
Down: The port is not active.
Active: The port is in active state.
Standby: The port is in standby state.
Partner Key
The key assigned to this port by the partner.
Partner Port
The partner port number associated with this link.
Partner Port Priority
The priority assigned to this partner port .
Activity :
The LACP mode of the group (Active or Passive).
Timeout :
Содержание Cross-8/HPoE-10G
