Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 243 / 321

12-2 Rate Limiters
The section describes how to configure the switch’s ACL Rate Limiter parameters. The Rate
Limiter Level from 1 to 16 that allow user to set rate limiter value and units with pps.
Web Interface
To configure ACL Rate Limiter in the web interface:
1. Click Access Control and Rate Limiters.
2. To specific the Rate field, Unit.
3. Click the Apply to save the setting
4. If you want to cancel the setting then you need to click the reset button. It will revert to
previously saved values.
Figure 12-2: The ACL Rate Limiter Configuration
Parameter description:

Rate Limiter ID :
The rate limiter ID for the settings contained in the same row and its range is 1 to 16.

Rate :
The valid rate is 0, 10, 20, 30, ..., 5000000 in pps
or 0, 25, 50, 75, ..., 10000000 in kbps.

Unit
Specify the rate unit. The allowed values are:
10pps: packets per second.
25kbps: Kbits per second.
Buttons

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.