Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 23 / 321


Add Route :
Click to add a new IP route. A maximum of 128 routes is supported.

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.
2-2.3 Status
2-2.3.1 IP Status
This page displays the status of the IP protocol layer. The status is defined by the IP
interfaces, the IP routes and the neighbour cache (ARP cache) status.
Web Interface
To display the log configuration in the web interface:
1.
Click System, IP Address, Status and IP Status.
2. Display the IP Configuration information.
Figure 2-2.3.1: The IP Status
Parameter description:
IP Interfaces

Interface :
Show the name of the interface.

Type :
Show the address type of the entry. This may be LINK or IPv4.

Address :
Show the current address of the interface (of the given type).

Status :
Show the status flags of the interface (and/or address).