Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 18 / 321

2-2 IP Address
2-2.1 Settings
The IPv4 address for the switch could be obtained via DHCP Server for VLAN 1. To manually
configure an address, you need to change the switch's default settings to values that are
compatible with your network. You may also need to establish a default gateway between the
switch and management stations that exist on another network segment.
Configure the IP basic settings
,
control IP interfaces and IP routes.
Web Interface
To configure an IP Settings in the web interface:
1. Click System, IP Address and Settings.
2.
Enable or Disable the IPv4 DHCP Client.
3. Specify the IPv4 Address, Subnet Mask, Gateway.
4. Select DNS Server.
5. Click Apply
Figure 2-2.1: The IP settings
Parameter description:

IPv4 DHCP Client Enable :
Enable the DHCP client by checking this box. If this option is enabled, the system will
configure the IPv4 address and mask of the interface using the DHCP protocol. The DHCP
client will announce the configured System Name as hostname to provide DNS lookup.

IPv4 Address :
The IPv4 address of the interface in dotted decimal notation .
If DHCP is enabled, this field is not used. The field may also be left blank if IPv4 operation
on the interface is not desired.

Subnet Mask :
The IPv4 network mask, in number of bits (prefix length). Valid values are between 0 and 30 bits for a
IPv4
address.
If
DHCP
is enabled, this field configures the fallback address network mask. The field may be left
blank if IPv4 operation on the interface is not desired - or no DHCP fallback address is desired.