Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 174 / 321

9-3 MVR
The MVR feature enables multicast traffic forwarding on the Multicast VLAN. In a multicast
television application, a PC or a television with a set-top box can receive the multicast stream.
Multiple set-top boxes or PCs can be connected to one subscriber port, which is a switch port
configured as an MVR receiver port. When a subscriber selects a channel, the set-top box or
PC sends an IGMP join message to Switch A to join the appropriate multicast. Uplink ports
that send and receive multicast data to and from the multicast VLAN are called MVR source
ports.
9-3.1 Basic Configuration
Web Interface
To configure the MVR Configuration in the web interface:
1.
Click Multicast, MVR and Basic Configuration.
2. Scroll the MVR mode to enable or disable and Scroll to set all parameters.
3. Click “Add New MVR VLAN”.
4. Specify MVR VID, MVR Name, IGMP Address, Mode, Tagging, Priority, LLQI, Interface
Channel Profile.
5. Select which port to Click Immediate Leave.
6. Click the apply to save the setting
7. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values
Figure 9-3.1: The MVR Configuration
Parameter description:

MVR Mode :
Enable/Disable the Global MVR.
The Unregistered Flooding control depends on the current configuration in
IGMP / MLD
Snooping. It is suggested to enable Unregistered Flooding control when the MVR group
table is full.

MVR VID :
Specify the Multicast VLAN ID.