EVGA 131-CL-E499 Скачать руководство пользователя страница 83

Страница: 83 / 165

EVGA Z490 DARK (131-CL-E499)

- 83 -

Repairing an array within IRST

This section of the guide will illustrate how to repair a degraded array from within the

IRST. For purposes of this guide, we are repairing a degraded RAID 1 array using a

third drive plugged into the controller, but not currently in use.

Below, you can see a degraded array, and one of its drives reported as missing/failed.

The data on the other drive is still intact, but the fault tolerance is offline due to the
missing/failed drive. The IRST also shows several warnings, the "!" for "Status," a"!" for

the portion of the array missing (showing the degradation of the logical drive), and the

"!" for the physical drive, which also states 0GB – a further indicator of a faulty drive.

You can repair the array from here or from the Manage tab at the top of IRST.

Содержание 131-CL-E499






































































































































































Результаты поиска

Содержание 131-CL-E499

Отзывы:

Похожие инструкции для 131-CL-E499

Бренды по названию

Популярные бренды

EVGA 131-CL-E499, Технические характеристики и первичная установка

Результаты поиска

Содержание 131-CL-E499

Отзывы:

Похожие инструкции для 131-CL-E499

Бренды по названию

Популярные бренды