evertz IXG CloudBridge, Руководство пользователя

Страница: 24 / 52

IXG CloudBridge
Internet Exchange Gateway Server
Page - 16
Revision 1.0
Figure 4-10 : WebEASY
®
- RX Side Webpage
2) To send specific data to the RX SIDE over the internet, enter the IP address of the source data in
“Multicast subscription address” under stream control section under Internet output IP stream tab
on the TX Side webpage.
4.3.2. Side 2 (RX)
1) Go to the webpage and click on IP input tab and check port link status (port link status shows the
connection between the source and access port of the card). “Up” status means it is connected to
the destination network. Please verify the connection from the IXG to the destination network if the
port status is “down.”