evertz HD9690 Series, Инструкция по эксплуатации, Страница: 27 / 130

HD9690 Series HDTV Graticule Generator Manual
INSTALLATION
Revision 1.5
Page 2-1
2. INSTALLATION
2.1. REAR PANEL OVERVIEW
Figure 2-1: Model HD9690 Rear Panel Layout
Figure 2-2: Model HD9690-444 Rear Panel Layout
Sections 2.1.1 to 2.1.5 describe the specific signals that should be connected to the units.
2.1.1. HD Video Connections (HD9690)
HD INPUT This two BNC connector is for connecting 4:2:2 10-bit serial digital video input signals,
compatible with the SMPTE ST 292-1 standard.
HD OUTPUTS These three BNC connectors are contain the serial digital video output and contain the
4:2:2 input video with graticules.
2.1.2. HD Video Connections (HD9690-444)
HD INPUT A/4:2:2 and B These two BNC connectors are for connecting dual link 10-bit serial digital
video input signals, compatible with the SMPTE ST 372 standard. When operating the
Graticule generator in the 4:2:2 mode, connect the 4:2:2 input video compatible with the
SMPTE ST 292-1 standard to the
A/4:2:2 inputs.
When the 3D option is fitted and operating the Graticule generator in the 4:2:2 mode,
connect the stereoscopic 4:2:2 input video compatible with the SMPTE ST 292-2 standard
to the
A/4:2:2 and B inputs. The Left Eye signal should be connected to the A/4:2:2 input
and the Right Eye signals should be connected to the B input.
HD OUTPUT A/4:2:2 and B These two BNC connectors are the main serial digital video output.
When operating the Graticule generator in the 4:4:4 mode, the dual link Video with
graticules will be available on these two output BNCs. When operating the Graticule
generator in the 4:2:2 mode, the 4:2:2 video with graticules is available on the
A/4:2:2
output.