evertz HD9690 Series, Инструкция по эксплуатации, Страница: 43 / 130

HD9690 Series HDTV Graticule Generator Manual
FRONT PANEL OPERATION
Revision 1.5
Page 3-5
3.2. SETUP MENU
The key to the operational flexibility of the Graticule Generator lies in the SETUP menu system. The
SETUP menu system uses the 16 digit alphanumeric display and provides a quick, intuitive method of
configuring the Graticule Generator, guiding you to the correct setup for your application. The SETUP
Menu contains items that pertain to the overall operation of the Graticule Generator. In addition each
object is controlled by its own
MODE and CTRL SEL settings. These context sensitive menus show only
the items applicable to the selected object for the current SETUP settings. See sections 0 to 3.8 for
information on controlling each of the objects through their MODE and CTRL SEL menus.
The two keys in the Setup key group (
SETUP , ESC ) and the two shaft encoders are used to cycle through
the various items on the SETUP menu. The SETUP menu consists of a main menu with two or more
choices for each menu item.
Safe Area
= 2046 RP218
Figure 3-3 and Figure 3-4 give an overview of the
SETUP menu for the HD9690 and HD9690-444
versions respectively. The menu items are shown on the left with grey shading and the various choices
are shown on the right with no background shading.
Mask apert = prod clean
Box % apert= prod clean
Obj blink = short long none
Ln disp = int rel int abs
Feedback = aspect pos
Force centre yes no
OSD Timer = Off 2 secs 5 secs 10 secs 30 secs 1 min On
OSD Posn = Top l Top r Bot l Bot r center
Safe Area = 2046 RP218
Figure 3-3: Overview of the HD9690 Setup Menu
Mask apert = prod clean
Box % apert= prod clean
Obj blink = short long none
Ln disp = int rel int abs
Feedback = aspect pos
Force centre yes no
OSD Timer = Off 2 secs 5 secs 10 secs 30 secs 1 min On
OSD Posn = Top l Top r Bot l Bot r center
Safe Area = 2046 RP218
Vid Type = Auto 444 HD 422 HD
444 Mode ycbcr rgb fsfull fsnorm
Figure 3-4: Overview of the HD9690-444 Setup Menu
To enter the front panel programming menu, press the
SETUP key. Pressing the SETUP key again allows
you to move vertically down the Setup menu tree. You can also use the left shaft encoder know to move
vertically up and down the Setup menu tree. The menu item is shown on the left of the front panel display
and the current value for that menu item is shown on the right. . Turn the right shaft encoder knob to
reveal the choices for the current menu item. When you have selected the desired sub menu choice press
the
SETUP key to save your choice and advance to the next menu item.