evertz EQX-IP18-IPG, Руководство пользователя

Страница: 30 / 54

EQX–IP18-IPG
EQX Input and IP Gateway Module
Page - 20
Revision 1.0
7.2.8. TRAP Destination IP
TRAP IP (1 to 5): This parameter allows the user to set the TRAP Destination addresses.
Figure 7-9: Trap Destination
7.2.9. Standard Control
SMPTE 2022 Standard
•
This control allows the user to select the protocol used for transporting encapsulated video.
Options are SMPTE-2022, Evertz TS or ASPEN(for future).
TS Packets Per Frame
•
This control is used to set the number of transmission packets per frame.
This options only applies to the non-SMPTE 2022 standards (Evertz TS and ASPEN). Range is
1-7. Must apply and reboot module in order for the change to take effect.

Note: Any changes in the Standard Control section require the module to be
rebooted.
Figure 7-10: Standard Control
7.2.10. Configuration Management
Export Configuration File
•
This option allows the user to download and save the configuration when the Download
button is clicked.
Import Configuration File
•
This option allows the user to upload a configuration file. To upload a file, Choose File and
click the Upload button.