evertz EQT-1616-3G-C, Руководство пользователя

Страница: 54 / 102

EQT-1616-3G-C-C
EQT 12G/3G/HD Router
Page 42
Encoded: This field is used to select whether the GPI connector in the EQT’s rear is to be encoded to
work individually (set as ‘Individual’) or collectively (set as ‘Encoded’).
In case Individual GPI is selected:
Route Enable: This field is used to enable/disable the four routes in each GPI pin.
Route SRC: This field is used to define the source channel for the route.
Route DEST: This field is used to define the destination channel for the route.
In case Encoded GPI is selected:
Dest Enable: This field is used to enable/disable the GPI pins.
Dest for Encoded Src: This field is used to define the Destination channel (1-16) from the encoded
source (detailed in Section 4.4.3)
6.8.2. GPO
Enable:
This field is used to enable/disable the GPO port.
Orientation: This field is used to set the GPO orientation, whether it is ‘Normally Opened’ or ‘Normally
Closed’.
Encoded: This field is used to select whether the GPO is to be encoded to work individually (set as
‘Individual’) or collectively (set as ‘Encoded’).
In case ‘Individual’ GPO is selected:
GPO Enable: This field is used to enable/disable the set of GPOs
GPO Function: This field is used to set which alarm is to be activated: Temperature Fault, Video Src
Missing, Video Route Selected and PSU Fault.
In case ‘Encoded’ GPO is selected:
Dest for Encoded Src: This field is used to define the destination channel (1-16), in which the source
will be displayed through GPO (detailed in Section 4.4.3).

NOTE: The device must be rebooted in order for the changes to take effect.