evertz 7882DEC-H264HD-IPASI Скачать руководство пользователя | Manualshive

Страница: 25 / 66

background image

7882DEC-H264HD-IPASI

HD/SD MPEG-2 and H.264 Decoder

VLPRO INTERFACE

Revision 1.0

Page - 15

Gateway:

This control allows the user to set the Gateway for the Data Port. This control will also

display the currently set Gateway.

Data Port <1,2> Monitor

SFP Part Number:

This parameter returns the part number of the SFP located in the Data Port.

Port Link Status:

This parameter returns the link status for the data port, communicating to the user

whether the link is up or down.

Port Link Info:

This parameter returns the link status for the data port, containing information about

speed and duplex.

Receive Bandwidth:

When the link is Up, this parameter returns the receive bandwidth currently

being read on the Data Port. Reading is in kbps.

Transmit Bandwidth:

When the link is Up, this parameter returns the transmit bandwidth currently

being sent on the Data Port. Reading is in kbps.

Syslog Configuration

Syslog is a valuable tool for debugging the device operation. It is essentially serial readouts over IP,
sent to a dedicated server. If issues are present, Evertz can help install and setup a syslog server for
constant monitoring of the device activity.

External Syslog:

This parameter allows the user to enable or disable sending syslog information to

the configured external server.

Syslog Server IP:

This parameter allows the user to assign the external syslog server IP address.

This will be the address of a PC with the syslog server software installed (e.g. Kiwi Syslog Server).

Temperature

Temperature Monitor:

This displays the temperature of the module.

4.2.

PRODUCT FEATURES

The 7882DEC-H264HD-IPASI has the ability to enable features by adding/updating applicable
licenses. Please contact Evertz Microsystems Ltd for any additional license generation along with
Product Serial Number and Product MAC address.

«
...
23
24
25
26
27
...
»

Содержание 7882DEC-H264HD-IPASI



































































Отзывы:

Нет отзывов

Похожие инструкции для 7882DEC-H264HD-IPASI

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 29

Бренд: NEC Страницы: 2

Бренд: Caliber Страницы: 26

Бренд: Harmonic Страницы: 27

Бренд: Comtech EF Data Страницы: 102

Бренд: AceWav Страницы: 2

Giga-MiniMC 856-10730-RX

Бренд: B&B Electronics Страницы: 15

Бренд: ENC Страницы: 57

Бренд: Xnexus Страницы: 20

Бренд: B PLUS TV Страницы: 10

Бренд: Actox Страницы: 36

Бренд: CYP Страницы: 16

Бренд: Keysight Technologies Страницы: 37

Omnitron iConverter GX/TM2

Бренд: Omnitron Systems Technology Страницы: 2

Бренд: ABK Страницы: 17

12-110-1250-Bxy

Бренд: Eaton Страницы: 31

Бренд: Commax Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды