evertz 7881TSM-IP, Руководство пользователя

Страница: 54 / 64

7881TSM-IP
User Manual
Page - 44
Version 1.0
7.7.3. WINDOWS MEASUREMENT
The window measurement values determine at what interval each PID (within the PID List Template) should be
expected before an alarm condition is met.
Windows Measurement 1 (ms): Enter a decimal value, measurement is in milliseconds.
Windows Measurement 2 (ms): Enter a decimal value, measurement is in milliseconds.
Windows Measurement 1 (s): Enter a decimal value, measurement is in seconds.
7.7.4. PID LIST TEMPLATE
The
PID List Template
provides a stream conformance or validation check. Here we can check the presence of
each PID using one of the Window Measurements as detailed above.
Snapshot Live Stream: This control is used to populate the PID List window with the PIDs currently found in
the stream. Use of this control is slightly different to most normal operations within VLPro.
•
Upon selecting the
Snapshot Live Stream
button, the action trigger is automatically executed and the PID
List Template Windows is refreshed after selecting “OK” in the popup Windows.
•
On an operational system ensure to de-select the
PID List Template
check box before making a new
snapshot, this will avoid alarm conditions being raised as the PID List changes.
PID List Template: Once the
PID List Template
has been populated and fully configured, this check box must
be checked to activate the PID List checking. Be sure to check the box once all configuration changes have been
made.
Reset PID Template: This control is used to reset the PID List. All entries will be set to “NOT SET”, all
Windows
Measurements
(WM) set to “Off”.