7700/7800 MultiFrame
Manual
7880IP-ASI-IP IP/ASI/IP Converter
Revision 1.1
Page 17
4.3.
IP TO OUTPUT TAB
The
IP to Output
tab enables to configure and view the parameters of the IP inputs and ASI Outputs.
This tab controls the IP input to be used for ASI output or IP retransmission.
Figure 4-3: IP to Output Tab
4.3.1. ASI Port Control
•
ASI Output Enable:
This control enables the user to enable or disable ASI Output.
•
ASI Output Select:
This control enables the user to select the source of the ASI Output. (Currently
1 Stream source)
4.3.2. IP Input Control Section
•
Stream Active:
Use this drop box to disable or enable the incoming IP stream
•
Multicast IP address (0.0.0.0 for Unicast):
Enter the destination IP address (This will be the
multicast address you want the 7880IP-ASI-IP to capture). Ensure that you enter the correct IP
address. A multicast address should be in the range of 224.0.0.0 through 239.255.255.255.
•
Destination UDP Port Number (0 to 65535):
This field enables the user to enter the destination
port number for the IP address entered above.
•
Ethernet Input Port:
Use this drop box to specify which physical data port is to be used to capture
the IP stream.
