evertz 5782DEC Скачать руководство пользователя страница 49

Страница: 49 / 60

5782DEC

Professional H.264 and MPEG-2 Decoder

WEBEASY

Revision 1.0

Page - 39

CC708 Insert Line:

This parameter allows the user to select the line on which to insert the CC708 for

ANC services.

AFD SD Insert Line:

This parameter allows the user to select the AFD insertion lines for SD video.

AFD SD Embed Enable:

This parameter allows the user to enable or disable AFD in the output for

SD video.

AFD SD VANC or VI:

This parameter allows the user to select whether to embed AFD data on

VANC or VI, the default is AFD On VANC.

AFD HD Insert Line:

This parameter allows the user to select the AFD insertion lines for HD video.

AFD HD Embed Enable:

This parameter allows the user to enable AFD in the output for HD video.

AFD Mode:

This parameter allows the user to control if the AFD is set for Sticky or Follow Input.

VBI Data Embed:

This parameter allows the user to enable VBI data in the output SDI.

SCTE104 Insert Line:

This parameter allows the user to select the SCTE104 insertion lines for ANC

service.

SCTE104 Embed Enable:

This parameter allows the user to enable the embedding of SCTE104

ancillary packets in the output.

Splice Delay:

SCTE104 splice delay for ANC services.

SCTE 104 GPO Invert:

This parameter allows the user to invert the SCTE 104 GPO pulse.

OP47 Insert Line:

This parameter allows the user to select the OP47 insertion lines for ANC

services.

OP47 Embed Enable:

This parameter allows the user to enable the embedding of OP47 Closed

Captions in the output.

WST Embed:

This parameter allows the user to enable the embedding of World Standard Teletext in

the output SDI.

WSS Embed:

This parameter allows the user to enable the embedding of WSS in the output SDI.

WSS Embed Mode:

This parameter allows the user to select the embedding mode for WSS.

Timecode SD Embed Mode:

This parameter allows the user to select the mode to use when

embedding the Time Code for SD video.

Timecode SDVITC Insert Line <1-2>:

This parameter allows the user to select the line to insert the

SD VITC Time Code data.

Timecode Embed Enable:

This parameter allows the user to enable the embedding of Time Code

for SD video.

Содержание 5782DEC





























































Результаты поиска

Содержание 5782DEC

Отзывы:

Похожие инструкции для 5782DEC

Бренды по названию

Популярные бренды

evertz 5782DEC, Руководство пользователя

Результаты поиска

Содержание 5782DEC

Отзывы:

Похожие инструкции для 5782DEC

Бренды по названию

Популярные бренды