evertz 570NAT-HW-X19, Руководство пользователя

Страница: 45 / 56

570NAT-HW-X19
High Density Network Address Translator
Revision 1.0
Page - 35
Figure 4-16 : WebEASY
®
- Link Aggregation \ Export Route
To export the currently set route to a router settings file, select ‘Export’ from the ‘To Perform’ menu. A
menu will appear prompting the user to set the range of inputs and outputs to be exported. Selecting ‘Ok’
will bring up a save file menu in the browser (this is the browser ‘save file’ menu and will vary by browser).
In the link aggregation page, the ‘Route’and ‘Un-Route’ menus (See Figure 4-14) pull up the que of routes
the user has selected to be added, and the que of routes to be un-routed’, respectively. This allows the
user to track the routes that are being added or removed before selecting ‘Apply’ and changes take effect.
4.7.1. Link Aggregation - Grid
Figure 4-17 : WebEASY
®
- Link Aggregation\Grid View
The grid view allows users to set routes for both LAN side and WAN side (separately, as shown in Figure
4-14) by matching a port to a core insid the grid. For example, Port 1 is currently mapped to Core 1. If I
wanted to link Port 9 to Core 1 instead, I would select the intersecting grid box for Core 1 and Port 9
(shown below in Figure 4-18).