evertz 5010, Инструкция по эксплуатации

Страница: 35 / 108

Model 5010 Time Code Master Manual
OPERATING INSTRUCTIONS
Revision 3.1.1
Page 4-1
4. OPERATING INSTRUCTIONS
4.1. FRONT PANEL OVERVIEW
Sixteen front panel keys handle operational control. Eight LED's provide operational status at a glance.
Figure 4-1: 5010 and 5010-VITC Front Panel Layout
Figure 4-2: 5010-24 and 5010-VITC-24 Front Panel Layout
4.1.1. Overview of the Pushbuttons
Sixteen front panel pushbuttons are used to control the operation of the 5010.
VITC GEN ON/OFF:
Is used to turn the VITC generator on and off (Model 5010-VITC and 5010-VITC-
24 only). The VITC indicator is ON when the VITC generator is enabled. The
time and user bits of the VITC generator are the same as for the LTC generator.
DISPLAY:
Is used to select whether the generator or reader time or user bits is being
displayed on the front panel alphanumeric display. The leftmost 3 characters of
the front panel displays whether time or user bits is being displayed, and
determines whether the generator reader is where the data is coming from (i.e.
LTM 12:34:56:10
indicates that time from the reader is being displayed).
JAM:
Is used to momentarily jam the reader time into the generator time. When the
SHIFT + JAM
keys are pressed, the 5010 generator will be put into continuous
jam sync mode.
HOLD:
When the generator is displayed on the front panel, pressing the
HOLD
key
stops the generator time from incrementing. A special character (
H
)
appears to
the left of the numeric display on the front panel, indicating that the display is in
Hold mode. Pressing the
HOLD
key again starts the generator incrementing.
When the Reader is displayed on the front panel, pressing the
HOLD
key freezes
the reader display data on the front panel and in the VCG. A special character (
F
) appears to the left of the numeric display on the front panel, indicating that the
display is in Freeze mode. Press the
HOLD
key again to return to normal update
mode.