evertz 3080UEP Series Скачать руководство пользователя

Страница: 34 / 62

3080UEP Series

Professional 3G/HD/SD Universal Contribution Encoding Platform

Page - 26

Revision 0.2

4.9.

PRESETS

Figure 4-10: VistaLINK

PRO – Presets

For each of the 10 Presets the following parameters are available:

Preset Name:

This field allows the user to enter a name for each preset.

Preset Store:

This control will take the current UEP settings and save them to a Preset. When

storing a preset all parameters will be stored except the following:

•

Control Port IP address, Netmask and Gateway.

•

Data Port 1 and 2 IP address, Netmask and Gateway.

•

Syslog Configuration.

•

Presets.

•

SNMP Trap destinations, Faults and Video Notify status.

Preset Recall:

This control will take the stored UEP settings and apply them. When recalling a

preset all parameters will be set except the following:

•

Control Port IP address, Netmask and Gateway will not change.

•

Data Port 1 and 2 IP address, Netmask and Gateway will not change.

•

Syslog Configuration will not change.

•

Presets will not change.

•

SNMP Trap destinations, Faults and Video Notify status will not change.

4.10. SNMP TRAP DESTINATIONS

Figure 4-11: VistaLINK

PRO – SNMP Trap Destinations

For each of the 10 SNMP Trap Destinations the following parameters are available:

Destination Enable:

This parameter allows the user enable sending traps to the Destination.

Destination IP Address:

This parameter allows the user to enter the IP address of a destination with

an SNMP server (like VLPro).

Содержание 3080UEP Series































































Результаты поиска

Содержание 3080UEP Series

Отзывы:

Похожие инструкции для 3080UEP Series

Бренды по названию

Популярные бренды

evertz 3080UEP Series, Руководство пользователя

Результаты поиска

Содержание 3080UEP Series

Отзывы:

Похожие инструкции для 3080UEP Series

Бренды по названию

Популярные бренды