evertz 3067VIP10G Series, Руководство пользователя

Страница: 17 / 46

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1
Page 9
4.3. DATA PORT
Figure 4-3: Data Port Tab
IP Address: This parameter allows the user to set the IP Address.
Netmask/Subnet Address: This parameter allows the user to set the Netmask/Subnet.
Gateway Address: This parameter allows the user to set the Gateway Address.
Received Optical Power: This parameter indicates the received optical power status on the SFP-Rx,
and is measured in 1dBm units. Range for this value can be from -128dB to 128dBm.
Port Link Status: This parameter will indicate the status of the port link as either ‘Up’ or ‘Down’.
Port Link Info: This parameter displays link status (i.e. speed, duplex).
Received Data Ethernet Total Bitrate: This parameter indicates the bit rate received on an Ethernet
Port in kbps. Range for this value can be from 0 to 1000000.
Transmitted Data Ethernet Total Bitrate: This parameter indicates the bit rate transmitted on an
Ethernet Portin kbps. Range for this value can be from 0 to 1000000.
Clear Stats: This parameter allows the user to reset the Ethernet monitored statistics.