evertz 3067VIP10G Series, Руководство пользователя

Страница: 16 / 46

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page 8
Revision 0.1
4.2. CONTROL PORT
Figure 4-2: Control Port Tab

Note: Both IP addresses use the same physical Network Interface Cards (NICs).
The two IP addresses which are set enable connections to the 3067VIP10G on
two different subnets, using the same physical NIC on the back of the EMX frame
for both IPs.
IP Address:
This parameter allows the user to set an IP address for the control port.
NetMask: This parameter allows the user to set the netmask (subnet) for the control port.
Gateway: This parameter allows the user to set the gateway address for the control port.