2408LT Standalone L-Band Fiber Optic Transmitter
Page -
4
Revision 1.5
!
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE
Background colour: yellow
Triangular band: black
Symbol: black
2.2.2. Assembly
Assembly or repair of the laser sub-module is done only at Evertz facility and performed only by Evertz
technical personnel.
2.2.3. Labeling
Certification and Identification labels are combined into one label.
•
Date of manufacture on this label can be traced by serial number.
•
Class 1 Laser Products: The Model number is one of the following 2408LTA13 or 2408LTxx (xx = 27,
29, 31, 33, 35, 37, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61)
Figure 2-3: Reproduction of 2408LT Certification and Identification
Label for Models that are Class 1 Laser Products
2.2.4. Handling and Connecting Fibers
"
Never touch the end face of an optical fiber. Always keep dust caps on optical fiber
connectors when not connected and always remember to properly clean the optical end
facet of a connector before making a connection.
The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore
care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending. Evertz
recommends that the user maintain a minimum bending radius of 5 cm to avoid fiber-bending loss that will
decrease the maximum attainable distance of the fiber cable.
