background image

Congratulations on purchasing a guitar with 
the EverTune bridge. EverTune allows players 
to focus continuously on their inspiration 
while holding the guitar in tune from the first 
to the last note no matter what. Please read 
this short instruction manual before using the 
EverTune the first time. And if there are still 
questions after reading this manual, please 
refer to our setup page online at 
evertune.com/setupfaq. Also feel free to 
contact us at any time at [email protected] 
and we will respond promptly.

So What is EverTune?

EverTune is an all passive system that is without batteries and 
is maintenance free. It is completely invisible. Once setup by 
the player, the string will just stay in tune, through temperature 
changes, any size and amount of bends, any fingering 
technique, any picking intensity, and any amount of string 
stretching. And if one string breaks, the others stay perfectly in 
tune, making EverTune the perfect guitar for all studio and live 
environments. 

Activating Each EverTune Saddle

For an EverTune saddle to be active, it must be placed in the 
active zone by the player.  To do this, loosen the Low E tuning 
peg until the string is slack. Now pluck the note and tighten 
the tuning peg. Keep plucking the note and tightening the 
tuning peg and listen until the note stays constant as in the 
Chart below. When the note 
stays constant, the saddle has 
entered Zone 2, EverTune’s 
active zone, which we also 
call ‘the sweet spot’. 
 

Before Zone 2, the pitch of the note goes up with each turn of 
the tuning peg, exactly like a conventional guitar. EverTune is 
inactive here. When we enter Zone 2, the pitch of the note stays 
constant and EverTune is active here. When we keep tightening 
the tuning peg we will eventually leave Zone 2 and the pitch of 
the note will start rising again. EverTune is only active in Zone 
2, so make sure every saddle is active (in Zone 2) before tuning 
and playing. [To see more on Zone 2 and The EverTune system 
check out evertune.com/setupfaq].

�����������

������

����������

������

�����������

������

����������

�������

��������

USER MANUAL

Содержание Guitar device

Страница 1: ...y in tune making EverTune the perfect guitar for all studio and live environments Activating Each EverTune Saddle For an EverTune saddle to be active it must be placed in the active zone by the player To do this loosen the Low E tuning peg until the string is slack Now pluck the note and tighten the tuning peg Keep plucking the note and tightening the tuning peg and listen until the note stays con...

Страница 2: ...ing the tune NOTE The EverTune hex key is a standard 2 5mm hex key available at all hardware stores Every 15 cents adjustment on a tuner is about one half turn of the hex key Please check out our Tuning page from evertune com setupfaq for more info Changing Strings Using the Same String Gauge When changing strings each string goes through one of the string holes on the back of the guitar comes up ...

Страница 3: ...tuning For higher and lower tensions custom saddles are available to order at EverTune com Please check out evertune com setupfaq for a table showing string sizes scale lengths and tunings CAUTION Please note if the hex key becomes hard to turn STOP TURNING IT the tuners may have reached the end of their range So if this happens please contact us at info evertune com We will respond promptly When ...

Страница 4: ...e the note goes sharp is the middle of the sweet spot Here even bending is balanced out by EverTune This is great for rhythm guitar and studio overdubs and tracks with layering of multiple guitar parts because the tune and intonation will be constant from take to take and day to day regardless of atmospheric conditions For more information on bending check out our Bending section at this page ever...

Отзывы: