1
VC451
S
OLAR
-
POWERED
PIR
C
AMERA
K
IT
Installation and Operating Manual
What you get
The components included in the C451Solar-powered PIR
Camera Kit:
●
1 x PIR Camera with Solar Panel (VC451)
●
1 x Remote Control (SR103)
●
1 x 6V 1.2A Rechargeable Battery
●
1 x 9V Alkaline Battery
●
1 x 3V CR2032 Lithium Battery
●
1 x Waterproof Rubber Plug
●
Fixing Pack and Operating Instruction
Product Layout
PIR Camera with Solar Panel (VC451)
1
2
3
4
5
6
7
1 Lens
2 Infrared
LED
3
PIR Motion Sensor
4 Status
LED
5 Solar
Panel
6 Front
Cover
7 Back
plate
Remote Control (SR103)
Arm
Disarm
Camera on
Camera off
Introduction
The 2.4GHz Solar-powered Color PIR Camera Kit is a truly
wireless camera, receiving all of its required energy from the
sun. With no wires to run, this camera installs easily, providing
security and convenience in a simple, economical manner. Its
solar panel collects daylight and maintains a charge to the
battery of the camera during daylight hours. A negligible amount
of energy is released by the rechargeable battery to operate the
camera during nighttime.
When the camera's PIR motion sensor detects motion, images
and voices are transmitted. Upon receiving these signals, the
optional wireless receiver (VR111) will activate the VCR/DVR to
start recording, so you'll know who visits or breaks in your
property while you are away.
Caution
Pay attention to the following before you install:
1. Sufficient daylight: Solar panel requires constant charge
during daylight hours. Please mount the camera at the location
that can receive sufficient daylight exposure.
Mount the PIR Camera at 2m height above the ground.
2. Detecting
sensitivity: A passive infrared sensor operates by
detecting the
objective
movement and
heat. When the
temperature of the
