1
EM-T1000..LU.092013.IM
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE! IF
YOU DO NOT UNDERSTAND THE INSTRUCTIONS, OR DO NOT FEEL THAT YOU CAN
FOLLOW THEM SAFELY, CONTACT A QUALIFIED CONTRACTOR. THE WARRANTY WILL BE
HONOURED IF ACCOMPANIED BY AN ORIGINAL SALES RECEIPT, AND ONLY IF THE
INSTRUCTIONS HAVE BEEN FOLLOWED EXACTLY.
To acquire missing parts please visit
http://www.everik.com/en-CA/Parts-Request.html
or call 1-866-604-6966.
• These mounts are designed to mount a panel onto a vertical wall. Hardware for mounting to a
wood stud is included. For mounting to any other surface, it is recommended you contact a
qualified contractor.
• The wall or mounting surface must be capable of supporting the combined weight of the mount
and the flat panel, otherwise the structure must be reinforced.
• Safety gear and proper tools must be used. A minimum of two people are required for this
installation. Failure to use safety gear and/or attempting this installation alone can result in
property damage, serious injury, or death.
• Follow all instructions and recommendations regarding adequate ventilation and suitable locations
for mounting your flat panel. Consult the owner’s manual of your flat panel for more information.
• This product will hold flat panels up to 70” and weighing up to 88 lbs.
• VESA 600mm x 400mm
Tools Required
• Phillips head screwdriver
• M6 socket and wrench
• Electric drill and 10mm masonry bit for concrete wall installation
• Pencil
•
Hammer
•
Stud finder
INSTRUCTIONS
EM-T2000
