22
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
4.3.3.
Software Update (Parameters Only)
This function will allow only the
Parameter
settings to be loaded from a
USB
drive, but
basically requires the same procedure as were used in the
Software Update
above. To
perform a
Parameter
update please contact the manufacturer service support team for
the necessary files. These files will come in a zipped folder, containing the following files;
➢
CHILL.emi
➢
indexemi.arg
NOTE
: the file
index.arg
changes according to the type of
Software Update
(
Software
,
Parameters
or both
Software
and
Parameters.
➢
parA.fac
A.
Download the files onto a
Pc
.
B.
Connect an empty, formatted
USB
drive to it.
C.
On the
USB
drive, create a folder and name it
“
CHILL
.”
D.
Copy the file
CHILL.emi
and
parA.fac
into the “
CHILL
”
folder.
E.
Exit from the “
CHILL
” folder and on the same
USB
drive, copy the files
indexemi.arg
The
USB
content will show as in the below picture:
A.
Remove the
USB
from the
PC
, slide the right side of the
Touch Screen
bezel open
and connect the
USB
drive to the port.
B.
Go to the
USB
function and select
SOFTWARE UPDATE
. A screen will pop up
asking to insert the
USB
key until the key is detected.
