EMV800 HD / EMV1200 HD Mobile DVR
85
6.3.4
GPS Event
You can configure the GPS settings to display the vehicle speed on the live view / recordings,
or to set up the GPS events including higher speed limit / GPS fencing for alarm notifications.
【
Event Action
】
: You can configure the alarm types for GPS events.
Email Notify:
Check box to enable email notification when GPS event occurs. Email
operation requires valid email settings entered in the Email setup screen (see
6.6.4 Email
).
Network Alarm:
Check box to send out a network alarm to the client PC. This feature works
with EverFocus’ CMS software. You will need to configure the Alarm Server for mobile DVR
to send network alarms to the client PC (see
6.6.7 Alarm Server)
.
Alarm Output:
This will transmit a signal through the alarm output relay. It can be set to
either “NONE” (not active), “1” (active) or “2” (active).
Output Type:
Output action when alarm is triggered.
Timeout: Alarm output lasts for the set time duration.
Permanent: Alarm will be continuously active until user presses the “Enter” key or
resets the alarm remotely.
Transparent: Alarm output remains active until event ends.
