Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
20
5.2.2
Image
You can configure the image settings on this page.
Day/Night Mode:
Select a Day/Night mode for the camera to display the color or B/W images.
•
Auto:
Select Auto for the camera to automatically switch to day or night mode. You can further set up a
Delay Switch
time (second) in the below field.
•
Color Mode:
Select Color Mode for the camera to display color images.
•
Black White Mode:
Select Black White Mode for the camera to display B/W images.
•
Schedule (B/W):
Select Schedule (B/W) for the camera to display B/W images during the setup time range.
Please select the
Start Time
and
End Time
in the below field.
Delay Switch (s):
This function can only be activated if you select
Auto
for the
Day/Night Mode
. Set up a delay
switch time (seconds) for the camera to auto switch between day and night modes.
IR-LED:
Select
On
to turn on IR LEDs; select
Off
to turn off IR-LED; select
Auto
for the camera to automatically
turn on / off the IR-LED based on the light sensor on the IP camera.
Flip:
Switch the button to the right to enable the Flip function. The image will be rotated vertically around a
horizontal axis.
Mirror:
Switch the button to the right to enable the Mirror function. The image will be rotated horizontally
around a vertical axis.
