23
inspection
overheatingnormally
Whether the wiring terminal falls off or changes color
Whether the insulting part of electric wire has the phenomenon
of aging and falling off.
Whether the dust in cabinet is too much
Whether the current displays incorrectly
Standard current
inspecting
Whether the voltage displays incorrectly
The changing time for cooling fun component: 1
～
2 years
One-year changing and
inspecting
High-speed fuse: after inspecting according to the actual use, operator must use the fuse with
the same type or recommended by manufacturer.
Note: cutting off the input power and DC output circuit before and maintenance and
inspection to avoid electric shock.
8.Warranty service
The charging machine ontology takes place as follows, the company will provide warranty
service:
1.Warranty scope refers only to the charging machine body.
2.During the product warranty period, the manufacturer shall be responsible for the repair
and repair after the normal use of the product. After the warranty period, reasonable
maintenance fee will be charged.
3.Even within the warranty period, if the following circumstances occur, a certain
maintenance fee shall be charged:
1)
machine damage caused by user manual operation;
2)
damage caused by fire, flood, abnormal power supply and human factors;
3)
use charger for the damage caused by the abnormal function;
4. The service fee shall be calculated according to the actual cost, if there is a contract or
agreement, which shall be dealt with in accordance with the principle of contract or
agreement.
Attachment: control panel diagram and description.
Control panel diagram and component location map (see attached drawing)
