Everet EVP412N, Руководство пользователя

Страница: 25 / 45

24 WWW.EVERETIMAGING.COM
Webinterface
1. Login
Run a browser and input IP address (default IP address is 192.168.1.188) to enter login interface as seen
below.
Default account
Username: admin
Password: admin
NOTE: If you cannot enter the webinterface with the default IP address there are two common
situations that could be causing this problem.
PC is not in the same range as the default IP address of the camera
-
In this case you would need to change the Ethernet adapter settings of your PC to get
in the same IP range ass the camera. Please check on the internet how to do this
according to the OS system that you are using.
PC and Camera are connected to a DHCP router.
1. Get into the OSD menu of the camera with the IR Remote controller.
2. Navigate to IP.
3. Set DHCP to ‘ON’
4. Press on the menu button of the IR Remote controller until you exit.
5. Restart the Camera and wait until it is completely rebooted.
6. Follow steps 1 and 2, check the IP address and try to get access
again in the webbrowser.