Everet EVP220, Руководство пользователя

Страница: 25 / 37

Clear Preset 0xA0 Address 0x00 0x05 0x00 Preset ID 0xAF XOR
Call Preset 0xA0 Address 0x00 0x07 0x00 Preset ID 0xAF XOR
Query Pan
Position
0xA0 Address 0x00 0x51 0x00 0x00 0xAF XOR
Query Pan
Position
Response
0xA0 Address 0x00 0x59 Value High Byte Value Low
Byte
0xAF XOR
Query Tilt
Position
0xA0 Address 0x00 0x53 0x00 0x00 0xAF XOR
Query Tilt
Position
Response
0xA0 Address 0x00 0x5B Value High Byte Value Low
Byte
0xAF XOR
Query Zoom
Position
0xA0 Address 0x00 0x55 0x00 0x00 0xAF XOR
Query Zoom
Position
Response
0xA0 Address 0x00 0x5D Value High Byte Value Low
Byte
0xAF XOR
​
OSD MENU
1. Press the MENU key on the IR remote controller, to enter the OSD menu as bellow:
2. After enter the main menu, use the navigate UP/DOWN key to select the main menu. Once selected,
the main menu will change to blue background, and the right side will show all sub menu options.
3. Press the navigate RIGHT key to enter sub menu; use UP/DOWN key to select the sub menu;
use the LEFT/RIGHT key to select parameter.
4. Press the MENU key again to return to previous menu. Press the MENU key continuously to exit the
OSD menu.
5. OSD Menu Setting List
SYSTEM LANGUAGE Optional Item: Chinese/English Default
：
English
PROTOCOL Optional item
：
VISCA/PELCO-P/PELCO-D Default
：
VISCA
ADDRESS VISCA:1~7 PELCO-P/D:1~255 Default
：
1
BAUD RATE Optional item: 2400/4800/9600/115200 Default
：
9600
RETURN Return to previous menu
FOCUS FOCUS MODE AUTO/MANUAL/PUSH Default
：
AUTO
24 WWW.EVERETIMAGING.COM