OSD MENU
1. Press the MENU key on the IR remote controller, to enter the OSD menu as bellow:
2. After enter the main menu, use the navigate UP/DOWN key to select the main menu. Once selected,
the main menu will change to blue background, and the right side will show all sub menu options.
3. Press the navigate RIGHT key to enter sub menu; use UP/DOWN key to select the sub menu;
use the LEFT/RIGHT key to select parameter.
4. Press the MENU key again to return to previous menu. Press the MENU key continuously to exit the
OSD menu. Before exiting, will show up a window to select whether need to save all settings (use
LEFT/RIGHT key to set). As bellow:
5. OSD Menu Setting List
SYSTEM
PROTOCOL
VISCA,PELCO-P,PELCO-D
Default
：
VISCA
ADDRESS
VISCA:1~7
PELCO-P/D:1~255
Default
：
1
BAUD RATE
2400,4800,9600,115200
Default
：
9600
PTL LOCK
Protocol lock: once set, above protocol setting will be locked
Default
：
OFF
RS485
RS485 ON/OFF
Default
：
OFF
VISCA
To select VISCA sources
Optional from via COM and via IP
（
VISCA over IP
）
Default
：
OVER ALL
LANGUAGE
Chinese, English
Default
：
English
EXPOSURE
EXPOSURE MODE
AUTO,MANUAL,BRIGHT,SHUTTER,IRIS
Default
：
AUTO
SHUTTER
Shutter speed:1/8~1/10000, only valid under manual mode
Default
：
AUTO
IRIS
Iris setting:CLOSE~F1.5, only valid under manual mode
Default
：
AUTO
GAIN
Gain setting:0dB~28dB , only valid under manual mode
Default
：
AUTO
26
WWW.EVERETIMAGING.COM
