EJ_3F012-3F013-3F014-INS-LAB-RevD20 • Traveler L3 Plus User Manual
9
4 HANDLING TIPS
The Everest & Jennings Traveler L3 Plus has been designed and engineered to perform as a
stable and well balanced unit when used for its intended purpose. However, it is possible to tip
the Traveler L3 Plus over if it is used improperly or if you move beyond the center of gravity.
You may want to consider the use of a positioning belt, available from your distributor or
www.grahamfield.com
, to maintain proper weight distribution. We urge you to learn the characteristics
of your wheelchair. It is most important to learn safe methods to perform the daily activities basic to
your lifestyle. Consult your medical professionals for assistance in developing the skills and proper
techniques to perform all activities safely.
BALANCE
Proper balance is the key to maintaining the stability of your wheelchair. Reaching, bending, and
transferring to or from a wheelchair will change your weight distribution and center of gravity.
When performing such activities, do so as instructed in the following paragraphs to avoid tipping
the wheelchair.
TRANSFER
WARNING: Always ensure the wheelchair is on a stable, level surface before transfer.
WARNING: Always engage wheel locks before transfer.
WARNING: Do not step on the footplates; this could cause the wheelchair to tip. Fold them
up, and either detach them, or swing them aside.
WARNING: There is a critical moment when there is little or no seat platform beneath you.
Take every precaution to reduce this unsupported distance before you attempt transfer.
Patient Lift Transfer Transfer Board Transfer
Transferring into or out of a wheelchair is a very difficult maneuver; always exercise extreme
care even when transferring with the aid of an attendant, a patient lift (shown at above left), or
a transfer board (shown at above right). Consult your medical professionals for assistance in
developing your individual transfer technique. Engage both wheel locks and ensure the wheelchair
is stabilized and will not move or slide during the transfer. Take extra precautions to prevent
tipping. Use good body mechanics to prevent personal injury.
