EJ_3F012-3F013-3F014-INS-LAB-RevD20 • Traveler L3 Plus User Manual
25
8 TROUBLESHOOTING
Continual use of your Traveler L3 Plus necessitates maintenance, especially if the factory-set
adjustments have been altered. The following troubleshooting guide lists several common
problems that may occur, and offers corrective actions for each. If you are unsure of the solution
or unable to diagnose the problem, do not hesitate to ask your GF authorized distributor for
assistance.
Nuts and / or bolts may be loose. If so, tighten.
Bolts should be snug.
Rear wheels and / or casters may be adjusted
improperly. Ensure that both rear wheels are
mounted in identical positions, and that casters
are mounted in identical positions.
Caster stem(s) may be adjusted improperly.
See distributor to correct adjustment.
looseness in wheelchair
squeaks / rattles
caster flutter
sluggish turning
chair veers left
chair veers right
SYMPTOM
PROBABLE CAUSE AND
CORRECTIVE ACTION
Info: Use only Everest & Jennings replacement parts. A Traveler L3 Plus parts catalog is
available at www.grahamfield.com to assist in the ordering of parts.
CAUTION: A complete inspection of your wheelchair, including maintenance, servicing
and safety checks, should be performed by a GF authorized distributor at least every six
months.
WARNING: Unauthorized modification or the use of non-Everest & Jennings replacement
parts could change the structure of the wheelchair, void the warranty, and create a
hazardous condition, which could result in serious personal injury.
