OBES63 FAULT CODES
To enter test mode follow the below steps;
Turn oven off at the electrical outlet
Press temperature buttons "PLUS" ( + ) & "MINUS" ( - ) together
TEST MODE
Each button has another function, from left to right;
Turn on oven at the electrical outlet while keeping the tempe & - buttons depressed
POSSIBLE SOLUTION
POSSIBLE CAUSE
Thermostat cable maybe
loose
Thermostat may be
damaged
Thermostat contacts
may be damaged
ERROR DESCRIPTION
If cables are loose, check &
correct wiring
Replace the mode selector
cable if it is damaged
Change the mode selector if
the above solutions did not
Mode selector cable may
be loose / damaged
Change the thermostat cable if
it is damaged
Change the thermostat
Thermostat cable may
be loose/ damaged
Thermostat contacts
may be damaged
DISPLAYING MAINS FREQUENCY
5. All 7 SEGMENT DIGITS are on
4. FAN is switched on & all SYMBOLS are on
6. BUZZER is switched on
7. Leave test mode
The oven is in test mode when
"tESt'
is displayed in the temperature display &
"Edxx"
is diplayed in the clock display
1. RING heater & COOLING FAN is switched on & measured cavity temperature is displayed
2. Oven LIGHT is switched on
3. No functions set
Open circuit on the oven
temperature sensor
(thermostat)
Open circuit on the oven
temperature sensor
(thermostat)
Mode selector short/open
circuit
There are 3 different signals to choose from
CHANGING THE BUZZER SIGNAL
Keep pressed ( - ) MINUS for a second & you will hear a signal
Thermostat cable may
be loose/ damaged
ERROR CODE
Err1 (failure 1)
Err2 (failure 2)
Err3 (failure 3)
Press ( + ) PLUS button & the mains frequency is displayed in the clock display
When pressed repeatedly, the signal frequency will change
If cables are loose, check &
correct wiring
Change the thermostat cable if
it is damaged
Change the thermostat
If cables are loose, check &
correct wiring
MODELS: OBES61
OBES62
OBES63
SERVICE MANUAL BUILT IN ELECTRIC OVENS
Page 3 of 23
All manuals and user guides at all-guides.com
