background image

TOOLS REQUIRED

Electric Drill

HARDWARE REQUIRED (NOT INCLUDED)

Duct Tape

Use and Care Guide

Drill Powered  
Duct Brush Kit

Installation

UNPLUG 
DRYER AND 
REMOVE 
DRYER 
DUCT

REMOVE OR OPEN EXTERIOR 
VENT HOOD 

CONNECT THE BRUSH HEAD TO ANY OF THE ROD(S)

INSERT BRUSH/ROD 
ASSEMBLY INTO 
WALL THROUGH 
DUCT OPENING 
WHERE DRYER WAS 
CONNECTED OR 
THROUGH OUTSIDE 
VENT HOOD OPENING. 

 

NOTE: A drill can be 
attached to the brush/
rod assembly for more 
effective cleaning

WHILE TURNING IN A CLOCKWISE 
DIRECTION, GENTLY PUSH AND PULL BRUSH/
ROD ASSEMBLY 12” AT A TIME. REPEAT 
UNTIL ENTIRE LENGTH OF DUCT IS CLEAN

 

CAUTION: Never force the brush/rod assembly 
through the duct. If it should become jammed, 
pull assembly away from constricted area a few 
inches (still rotating in a clockwise direction) then 
slowly push forward

CHECK OUTSIDE VENT HOOD 
AND INSIDE WALL DUCT 
OPENING TO ENSURE ENTIRE 
DUCT HAS BEEN CLEANED. 
REMOVE ANY LINT PUSHED OUT 
FROM THE CLEANING PROCESS 
AND CLOSE OR REPLACE HOOD

RECONNECT THE DRYER DUCT 
TO THE DRYER AND PUSH 
DRYER BACK INTO PLACE

TURN ON DRYER AND ENSURE 
THE AIR IS FLOWING PROPERLY 
THROUGHOUT THE DUCT AND 
EXHAUSTING AIR THROUGH THE 
OUTSIDE VENT CAP

 

Warranty

WHAT IS COVERED

All merchandise is warranted to be free from defects in workmanship and material for one year from the date of purchase. This includes normal wear and 
performance failure on items. The manufacturer will replace or repair at their option.

WHAT IS NOT COVERED

This warranty only covers normal wear and performance failure. It does not cover any malfunction, performance failure, or defect arising from the misuse, 
abuse, neglect, or modification of the product. Any damage or malfunction inflicted upon the product by the user or other external sources, or any failure to 
comply with the warnings and instructions, is not covered.

For further assistance call 1-800-305-1726 or visit www.HomeDepot.com.

HOMEDEPOT.COM

  Item # 600-221
 Model  #  PCPBHD

Отзывы: