everActive NC 1000M, Руководство пользователя

Страница: 11 / 40

11
inserted cell’s voltage is above 0.20V, the charger will
detect the battery and allow further operation.
Mode selection.
Short pressing “Mode” button within first 8 seconds
activates operation mode change for all newly installed
batteries. By pressing the “Slot” button the user can select
individual battery to adjust the operation mode.
After the operation has started the operation mode can
still be altered for individual batteries using the “Slot”
button and afterwards by holding “Mode” button for
about 3s. Available operation modes: “Charge”,
“Discharge”, “Test”, “Cycle”.
For 8 seconds after selecting the desired operation mode
the user can adjust charging/discharging current by
pressing the “Current” button.
Charging current selection.
For the first 8 seconds after the batteries are inserted the
user can adjust the charging current for all of the batteries
by pressing the “Current” button. By pressing the “Slot”
button the user can select individual battery to adjust the
current. Possible values are: 0.25A, 0.50A, 0.75A and
1.00A. Charging will start automatically after 8 seconds
from the moment last button was pressed.