12
Stage 3. End of charging process. Trickle charge is applied
to maintain full charge of the inserted batteries.
Icon “Full” will be shown on display. Pressing “Display” button will show
various information – time, trickle charging current, voltage level, charged
capacity in mAh/Ah - please note it’s not the same value as battery’s
rated capacity.
Refresh mode
– a special combination of several charge
and discharge cycles. The charger tries to maximize the
capacity of older cells, which were not used for an
extended period of time. Can be used to initialize/form
new batteries and check their real capacity or to reduce
the memory effect. Please take note that this process can
take even few days to complete. At the end of the process
maximum cell capacity can be read from LCD display.
Stage 1. Several charge/discharge cycles with capacity test.
Pressing “Display” button will show various information – time,
discharging current, voltage level, capacity in mAh/Ah.
