Eventide E-TEC 115 H.P. страница 8 Скачать руководство пользователя | Manualshive

Страница: 8 / 96

background image

4

About This Guide

This Operator’s Guide is an essential part of
your Evinrude E-TEC outboard. It contains
pertinent information which, if followed, will
provide you with a thorough understanding
needed for proper operation, maintenance,
care, and—above all—safety. Safety is our
first priority and it should be yours too. It is
strongly recommended you read this Guide
from cover to cover. The more you know and
understand about your Evinrude E-TEC out-
board, the greater the safety and pleasure
you will get from using it. Following this rec-
ommendation will assure the completeness of
the information essential to your safety, the
safety of any passengers, and other water us-
ers.

This Operator’s Guide identifies important
safety messages.

Although the mere reading of such informa-
tion does not eliminate the hazard, the under-
standing and application of the information
will promote the correct use of your outboard
engine.

This Guide should be kept in a waterproof bag
with the outboard at all times during opera-
tion. If the product ownership is transferred,
this Guide should be forwarded to the new
owners.

A responsible, educated boater will fully ap-
preciate the pleasures of boating and will be a
safe boater. Boating Safety Classes are con-
ducted by the U.S. Coast Guard Auxiliary, the
U.S. Power Squadron and some Red Cross
Chapters. For information about classes, call
toll free 1-800-336-BOAT.

For additional information about boating safe-
ty and regulations, call:
• U.S. Coast Guard Boating Safety Hotline

1-800-368-5647.

Outside North America please contact your
Dealer or distributor for details about boating
safety.

This Operator’s Guide uses the following sig-
nal words identifying important safety mes-
sages.

IMPORTANT: Identifies information that will
help with assembly and operation of the prod-
uct.



Safety Alert Symbol

This is the Safety Alert symbol. It is used
to alert you to potential personal injury
hazards. Obey all safety messages that
follow this symbol to avoid possible injury
or death.



DANGER

Indicates a hazardous situation which, if
not avoided, will result in death or seri-
ous injury.



WARNING

Indicates a hazardous situation which, if
not avoided, could result in death or seri-
ous injury.



CAUTION

Indicates a hazardous situation which, if
not avoided, could result in minor or
moderate injury

NOTICE

Indicates an instruction which, if not fol-
lowed, could severely damage engine
components or other property.

ENVIRONMENTAL NOTE

A note which provides tips and behaviors re-
lated to protecting the environment.

https://www.boat-manuals.com/evinrude/

«
...
6
7
8
9
10
...
»

Содержание E-TEC 115 H.P.

































































































Отзывы:

Нет отзывов

Похожие инструкции для E-TEC 115 H.P.

Бренд: Lantronix Страницы: 10

Бренд: Xeltek Страницы: 19

Бренд: Biostar Страницы: 49

Бренд: Gigabyte Страницы: 125

Бренд: C&T Solution Страницы: 84

TA870 PLUS - SETUP 2

Бренд: Biostar Страницы: 67

Бренд: TYAN Страницы: 64

GeForce 8300 (MI-A78U-8309)

Бренд: XFX Страницы: 26

Бренд: BCM Страницы: 3

Бренд: Bartels Mikrotechnik Страницы: 9

Бренд: ECS Страницы: 87

Бренд: ASROCK Страницы: 71

Бренд: J&W Страницы: 39

Бренд: Ublox Страницы: 20

Memorator Pro 5xHS CB

Бренд: Kvaser Страницы: 16

MVME61006E-0161

Бренд: Emerson Страницы: 100

MVME6100 Series

Бренд: Emerson Страницы: 118

Бренд: Emerson Страницы: 122

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды