www.event-lighting.com.au
4
Disassembly
7. Once the latches are secure, the crowd barrier is in place.
Repeat the process until the wall is complete. Note that
corners and gates will follow a similar process, refer to the
individual manuals on correct and safe way to connect those
components.
1.
Using an allen key, turn the latches clockwise to undo,
making sure to turn all the way to release each part
from each other. Always start from outer-most units
first.
2.
Loosen nut of floor holding screw and remove the
screw.
3.
Lift smaller frame behind wall and carefully push
forward on the wall part from near the base, while
standing on the floor and lower the wall towards the
collapsed position, making sure the smaller frame
folds in with it. Be sure to keep hands and fingers away
from folding parts. Repeat process for each crowd
barrier.
