evenharmonic Gtak6, Руководство пользователя, Страница: 8 / 22

Now load a Gtak6 instrument:
1. Click the disk icon in Kontakt6 to open the file menu.
Click load .…
2. Navigate to one of the folders under the Gtak6 folder
(e.g. Gtak6\Band\1 - Horns )
3. Select an instrument (e.g. Sax Section.nki ) and
click open.
There are many other ways of loading instru-
ments. The fastest is the Quick-load catalog.
To make Gtak6 instruments appear in this
menu see here .
1. Click the down arrow by Midi ch: and select omni .
2. Play!
To make Omni mode the default for loaded in-
struments see
here .
If the instrument does not play properly see here .
One final optional step: Gtak6 has built-in help. When
you hover over a control with your mouse help appears in
the info pane. To show the info pane click the “i” icon as
shown below:
4 Gtak6 Basics
We have set sensible defaults for all the instruments in
the Kontakt6 Library, so often you will not need to make
any changes. If, for example, you want to play different
instruments on different strings or use pedal control you
have to make settings on the Gtak6 Panel.
If you want to do more advanced things such as config-
ure a guitar in a non-standard tuning, transpose strings,
or change various other settings you will use the Config
Panel which is described
here .
4.1 The Gtak6 panel
Gtak6 is a KSP script with a Performance View , this
means that its controls appear in the instrument header
(unless the instrument is minimized). Each Kontakt6 in-
strument can contain up to 5 KSP scripts. If more than
one script has a
Performance View then tabs will ap-
pear at the bottom of the instrument to allow you to select
which script’s panel to show.
In this case, to switch from another panel to Gtak6’s panel
click on the
Gtak6 tab as shown below.
We have modified many of the other KSP
scripts in the Kontakt6 Library to make every-
thing work properly. These scripts have been
renamed
Original_name (Gtak) .
4.2 String enable
You can select which strings the instrument responds to
using the string enable buttons at the top of the panel.
In the example shown above, the instrument will play
8