16
1. Disconnect tether
hook and lower
anchor connectors
from the back of the
child restraint.
Installation with lower anchor connector
assembly
Tether Strap
2. Place the child restraint in position.
Set child restraint on vehicle seat in forward-facing
position. Lay the tether strap over the back of the
vehicle seat.
To avoid a strangulation hazard, you
MUST
store the
unused lower anchor connector assembly, with all slack
removed, in storage area on the back of the seat
(p.
). Roll or fold excess lower anchor connector
strap and secure with a rubber band to prevent serious
injury to vehicle occupants.
WARNING
LATCH is a system for attaching the child restraint
to your vehicle seat. It is to be used in place of your
vehicle’s seat belts and can be used in vehicles with
LATCH anchors.
DO NOT
install this child restraint with
the vehicle seat belts AND LATCH (Your vehicle owner’s
manual may refer to this system as ISOFIX, Universal
Anchorage System (UAS), or Lower Universal Anchorage
System.)
