39
38
Boo
st
er
4. Route the harness
straps through
adjustment slots,
then attach to
splitter plate.
5. Fold and tuck the
harness, chest clip
and buckle tongues
into the recesses on
either side of the
seat shell.
Look for logos on
seat shell for proper
storage locations.
PLACE
AT ARMPIT
LEVEL
PUSH
Make sure both harness
straps are installed
completely
on the splitter
plate, as shown.
6. Remove the crotch
strap.
Locate the crotch strap
anchor on the bottom.
Turn the anchor sideways
and push it through the
seat shell to remove, as
shown.
Insert the crotch strap
anchor back into the
opening
from the bottom
of the child restraint.
Pull the anchor through
the seat and adjust so it
lies flat.
Converting into a Booster Seat
Converting into a Booster Seat
3. Disconnect all
elastic loops and all
retaining strips, then
remove the seat pad.
