Evenflo Maestro Sport Exclusive RightFit Belt Path, Руководство пользователя

Страница: 15 / 29

29 28
TO
C
6. Connect and tighten tether strap.
Connect the tether hook to the anchor behind the
vehicle seat, as shown. (Please consult your vehicle
owner’s manual, as tether anchor locations may vary.)
Pull the strap and tighten the tether securely.
IMPORTANT:
If your tether strap is too short to reach
from your child restraint to your vehicle tether anchor,
you will need a Tether Extender. Please call ParentLink at
1-800-233-5921 (U.S.) or 1-937-773-3971 (Canada), or
01-800-706-12-00 (Mexico).
5
-p
t Harne
ss
Installation with
Vehicle Seat Belts
To remove the hook,
press the tab and twist,
then remove from anchor.
Or
Or
To remove the clip, pull
the red release strap and
remove clip from anchor.
The Lower Anchor Connector that comes with your
child restraint will be one of the two types below.
Using your full
weight, push the child
restraint into the vehicle
seat while loosening
the adjuster.
T
ip
!
T
ip
!
Removing the Lower Anchor Connectors
1. Loosen the adjuster
2. Remove the connectors.
Press the adjuster release
button to loosen.
Tilt and slide the adjuster
to loosen.