Evenflo ExerSaucer Safari Friends, Инструкция по эксплуатации

Страница: 5 / 28

3
Assembling the ExerSaucer
5. Insert a foot C into the bottom of each pylon B , as
shown. Secure each foot with one 8-16 X 75 mm screw D
and four 8-16 X 18 mm screws E . Tighten all 10 screws
securely but do not overtighten . DO NOT USE POWER
TOOLS.
IMPORTANT: Each foot MUST sit completely flat in the
bottom of the pylon. If it is raised on either end, then one of
the stabilizer tubes is not installed correctly or is not fully
inserted. If this is the case, remove the stabilizer tube and
reinstall until the foot fits over it correctly.
E
E
C
D
6. Place seat ring F upside down and
locate the wheel holders G .
Snap four seat wheels H into wheel
holders, as shown.
F
H
G
E
E
C
D
B
B
7. Turn seat ring
F
right side up.
Align the two triangles on the
back of the seat ring with the two
triangles on the label on the seat
pad
I
.
Snap the plastic tabs
J
on the pad
over the pegs
K
on the seat ring.
Continue this process until all tabs
are attached to all pegs.
K
K
J J
Triangles
I
L
F