35
34
Connect the tether
hook
E
to the vehicle
tether anchor
F
behind
the vehicle seat, as
shown. (Please consult
your vehicle owner’s
manual, as tether anchor
locations may vary.) Pull
the strap
G
and tighten
the tether securely.
• To avoid a strangulation hazard, you
MUST
tightly
roll or fold excess tether strap and secure with the
strap/rubber band.
• Attach the tether hook to the storage clip when not in
use. This will keep an unused tether from hitting someone
during a crash.
9
Note: If your tether strap does not reach the vehicle
tether anchor bracket, call Evenflo’s ParentLink for a
tether extender, at 1-800-233-5921 (U.S.) or
1-937-773-3971 (Canada), or 01-800-706-12-00
(Mexico).
F
E
G
This page is intentionally blank.
After adjusting the top tether strap, you may have
excess strap;
DO NOT
cut it off. If you do, it may not be
long enough to use in another vehicle. Instead, tightly
roll up the excess tether strap and place the
rubber band around the bundle.
Note: Refer to your vehicle owner’s manual for the
location of the tether anchor bracket in your vehicle.
Older vehicles may not come equipped with anchor
bracket hardware. Check with your vehicle dealer.
If you have questions regarding tether anchors that are
not addressed by the vehicle owner’s manual or
answered by an authorized dealer/vehicle manufacturer,
call Evenflo’s ParentLink at 1-800-233-5921 (U.S.)
or 1-937-773-3971 (Canada), or 01-800-706-12-00
(Mexico).
For
ward-facing
WARNING
