PACKAGE CONTENT
►
Slave Monitors
►
Stereo Link Cable
►
External PSU
►
2 x FlexiPad
►
Product manual
1
2
AUDIO CONNECTIONS
►
Connect the signal source with either both analog RCA L/R ins, the digital optical input or the USB port.
►
Link both SC203 Master and Slave monitors using the provided 4-pin connection cable.
Right monitor (Master)
Left monitor (Slave)
ANALOG AUDIO SOURCE:
Soundcard, mixer, synthesizer, MP3/CD/DVD player, laptop, etc.
DIGITAL USB AUDIO SOURCE:
Soundcard, MP3/CD player, computer, etc.
DIGITAL OPTICAL AUDIO SOURCE:
Soundcard, mixer, synthesizer, SACD/CD/DVD player, etc.
OR
OR
3
POWERING ON
►
Connect the Master monitor (right
speaker) to AC mains power using the
provided external PSU.
►
On the Master monitor rear panel,
make sure that the Satellite filter DIP
switch is in OFF position.
4
SELECTING INPUT
►
Briefly push the front-panel encoder to switch the system on.
►
Push the encoder to enter menu: "Bal" LED should blink.
►
Turn the encoder clockwise until "Input" LED starts blinking.
►
A constantly lighting LED shows the selected input. Turn the
encoder to select the input connected to the signal source:
- Top LED (#12) is lighting: Analog RCA L/R inputs
- Next LED clockwise (#13) is lighting: Digital optical input
- Next LED clockwise (#14) is lighting: USB port
►
Push & hold the encoder for 3 sec. or don‘t touch it for 10 sec.
to quit the menu.
►
Turn the encoder to adjust the system volume and refer to the
product manual to know everything on your SC203 system!
Analog in
Digital in
USB port
QUICK START GUIDE
EVE AUDIO SC203 MASTER/SLAVE SYSTEM
English
