Eusso UOW2000 Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 63

Eusso UOW2000 Series Скачать руководство пользователя страница 21

Chapter 4.

All function on Device

4.1

BASIC

4.1.1

Wizard
This wizard guides you through the following basic Access Point
setup steps:

Set your Password

Select your Time Zone

Configure your Wireless Connection

WCN Wizard

If your PC's operating system is Windows XP Service Pack 2 (SP2)
or later and you are using Windows Internet Explorer (IE) as your
browser, you can use Windows Connect Now (WCN) technology to
help configure the Access Point's wireless security settings.
Wireless Network Setup Wizard
Before you can use the Access Point's WCN Wizard, you must first
execute the Wireless Network Setup Wizard on your PC. If you
have not already done so, go to the Windows Control Panel and
select Wireless Network Setup Wizard. When the Wireless Network
Setup Wizard gives you the choice to "Use a USB flash drive" or
"Set up a network manually", choose the latter. (In fact, you will
not have to do the set-up manually; it will be done with the WCN
ActiveX Control.)
WCN ActiveX Control
The WCN ActiveX Control provides the WCN link between your PC
and the Access Point via the browser that communicates wireless
configuration data without a USB flash drive. The browser will
attempt to download the WCN ActiveX Control, if it is not already
available on your PC. For this action to succeed, you must already
have a WAN connection, and the browser's internet security
setting must be Medium or lower (select Tools -> Internet Options
-> Security -> Custom Level -> Medium).
When the necessary preparations are complete, the WCN
technology will propagate the wireless network settings from your
PC to the Access Point. Then you will have to reboot the Access
Point for the settings to take effect.

21

«
...
19
20
21
22
23
...
»

Содержание UOW2000 Series
































































Отзывы:

Нет отзывов