Operation Quick Reference Applicable model: USB-TA2 2-port USB Cable KVM w/ Audio&Mic + 1 x QuickSwitch Button for wired remote control
Rev. 1.0 Copyright© All rights reserved.
Analog Video
up to 2048 x 1536
QuickSwitch button for easy switching by a mere flip!
Switching Software Client for Windows & Mac included!!
Software Hotkeys & Universal Hotkeys both available!!!
2 x USB 2.0 Hub Ports
for keyboard, mouse or high-
speed USB devices!!!!
UKS8202-U2C
2-port USB Cable KVM w/ Audio&Mic
1 x QuickSwitch button for wired remote control
2 x Fixed KVM Audio/Mic Combo Cables
Quick Installation Guide
Thank you for purchasing the
UKS8202-U2C USB Cable KVM
Switch
! With our highly reliable and quality product, user can
enjoy countless benefits from using it.
UKS8202-U2C
Introduction
The
UKS8202-U2C
is a 2-port
USB Cable KVM Switch
with 2 x
fixed KVM cables and 1 x QuickSwitch button for wired remote
control. It also provides
Audio and Microphone switching
function
for uninterrupted multimedia experience. It allows you to access,
control, boot and reboot multiple
multimedia
computers using
only one USB keyboard, mouse, monitor
and a speaker set and
microphone
.
For computers running Windows/Mac operating systems, it also
provides an innovative and easy-to-use
KVM Switcher Software
-
- small Windows/Mac client application to facilitate your KVM
switching operations such as computer selection and hotkey
sequence programming, autoscanning, autoscan delay time
programming, independent/simultaneous audio & computer
Switching, etc.
The
UKS8202-U2C USB Cable KVM Switch
offers USB 2.0
interface technology for Plug-and-Play and hot-pluggability. In
addition to connect to mouse or keyboard, those two USB 2.0
ports can also be connected to other high-speed USB devices.
Users can enjoy maximum flexibility and convenience with its
compact and one-piece design.
Out-of-Box Installation
Take the Support CDROM and the Cable KVM Switch out of
the box and follow the steps below for installation….
Step 1.
Insert the Support CD ROM into your CD drive, and The
installation interface will pop up (If the Autorun feature
has not been enabled on your computer. Just find the
Autorun.exe on the CDROM and double-click it to start.).
Step 2-1.
For Windows/Mac
: Just click the “Software Installation
for Window” to start Windows switcheqdi r software
installation. To install Mac version, please copy the file
(*.pkg format) to the local hard disk and install it from
there. Follow the instructions to completion. If the
instillation is complete, you will see a KVM Switcher icon
on the system tray of your desktop. Right-click to evoke
the operation menu and double-click to evoke
configuration box. For operation details of the KVM
Switcher software, please refer to the following sections
.
Windows Mac OS
No live connection detected
Current active computer channel is on port 1
Current active computer channel is on port 2
The Mac version of the KVM switcher software supports only Mac OS
10.4 (Tiger) and later. Earlier version of the Mac OS might or
might not work well with it.
The KVM Switcher Software supports both the Windows and the Mac
OS operating systems. For other OS platforms such as Linux ,
you can still use the universal keyboard hotkey - ScrLk + ScrLK
- to switch computer. However, this switching hotkey is not
available on non-computer platform such as Mac OS.
Step 3
.
Connect a set of the fixed KVM/Audio&Mic cables to a
computer’s connectors. Connect another set of cables
to another computer. Now you can operate the KVM
Switch immediately.
Some older computers with USB interface might need to manually
enable the USB option in the BIOS settings before you can use any
USB devices. If your USB interface does not work, please check the
USB option status in the BIOS.
If you has not yet installed a USB mouse on your computer, there
might be an error message telling you that mouse is not detected and
prompting you to decide whether to ignore the same message in the
future, and yet you found there is no mouse movement to disable
this message….So it is suggested that you should installed your USB
mouse on your computer first, before connecting it to this KVM
Switch.
